Page 4
  As you can see, the results were great! I was shooting to build up .005 total on the OD but, ended up with .0025, hmmm! However, the brass thiefs did have .005 total build up, seems like the brass draws a bit more chrome plating than steel. I'll have to adjust for that on the next attempt, I could switch to steel for the thiefs but, it's alot easier to strip chrome from the brass by throwing it into muratic acid vs. the steel and electro deplating however,  the plating came out very consistant on size, a little stoning and I think it'll be ready. Sounds like a pretty large buildup on the bearings eh? I have have my reasons!  This was a used bearing so, I wasn't to worried, just an experiment.