Here is a collection of articles that have appeared in the Torque Roll and elsewhere that contain valuable information for folks that want to race. If you have an article to contribute, please prepare it and send via e-mail to the . It will be reviewed and added if deemed useful and appropriate.
F2CN Shutoff by Dave Hull | Prop Trimming Jig by Bill Lee |
---|
Wayne Trivin was an absolute genius! He never hesitated to try and do anything, and always made it right. Wayne created a website where he wrote up a jillion different things, and when, sadly, Wayne died in 2005, NCLRA captured his site and has (and will!) preserve it. Here are some direct links to Wayne's write-ups, or you can visit his main page here.
Gibeault Mouse Primer - 2016 edition by Paul Gibeault | Basics of Uniflow by Bill Lee |
---|---|
B-TR Tank Design by John Hallowell, Australia | Wing Press by Don Burke |
Pitch Gauge by John Kilsdonk | Making Head Shims by Russ Green |
Where Does The NV Hole Go? by Bill Lee | Profile model fuel shut-off by Stu Willoughby |